Tubular Radius Arm Kit 2023-2026 Ford SD F250/F350 Diesel
Heavy-duty tubular construction.
Designed to correct suspension geometry on 3.5-inch to 6-inch lifted models.
Helps to correct the caster angle.
Allows for larger tires to be installed.
Ease of installation with direct bolt-on design.
Oversized rubber bushings to better isolate road noise and vibration harshness.
***Trucks equipped with the "Onboard Scale" option will require the Auto-Leveling Headlight Bracket.***
PN: 67-23610 - Ford Super Duty Auto-Leveling Headlight Bypass Bracket Kit
Description
Heavy-duty tubular construction.
Designed to correct suspension geometry on 3.5-inch to 6-inch lifted models.
Helps to correct the caster angle.
Allows for larger tires to be installed.
Ease of installation with direct bolt-on design.
Oversized rubber bushings to better isolate road noise and vibration harshness.
***Trucks equipped with the "Onboard Scale" option will require the Auto-Leveling Headlight Bracket.***
PN: 67-23610 - Ford Super Duty Auto-Leveling Headlight Bypass Bracket Kit
The all-new Radius Arm upgrade kit for the 2023-2026 Ford F250 / F350 is designed to correct the suspension geometry on lifted models. These new Radius Arms are heavy duty and are built to handle the use and abuse demanded out of Super Duty trucks. The arms are formed inward allowing for additional clearance and providing even more space for oversized tires. The direct bolt-on design promotes quick and easy installation.
Radius Arm, Left, Assembled
Radius Arm, Right, Assembled
Cam Bolt Kit
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
TIRE/WHEEL SIZING GUIDE