SST3000 Rear Shock - For 5 Inch Of Rear Lift - Ford F150 2009-2020

In stock
SKU
93-2057R
$48.96

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

Sold Individually - For F150 trucks with 5 Inches of Rear Suspension Lift Gas / Oil Separated - Eliminates Cavitation. 5/8" Hard Chrome Plated Shaft. Rebuildable and Revalvable. Two-Stage Sealing System - Dirt Out, Oil In. Nitrogen Charged Internal Chamber. Designed For Use On Leveled & Mild Lifted Vehicles. Developed For Use With Larger Oversized Wheels and Tires. Made in USA.
  • ReadyLIFT SST3000 Precision Performance Tuned Shocks SOLD INDIVIDUALLY - 93-2057R shocks for the 2009-2020 Ford F150 2WD/4WD trucks are designed to be used on trucks with 5 inches of rear lift. Engineered for driving enthusiasts who demand a specialized shock for their lifted or leveled truck.
  • WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

  • Estimated Installation Time: 1.5 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

    INSTALLATION ALIGNMENT NOTE
    Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
    Additional alignment costs may apply.

    INSTALLATION HEADLAMP AIM NOTE
    Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
    Additional headlamp adjustment costs may apply.

    ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
    If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
    This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
    Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
    Additional ADAS calibration costs may apply.

    Have a certified mechanic do it for you!


Description
Sold Individually - For F150 trucks with 5 Inches of Rear Suspension Lift Gas / Oil Separated - Eliminates Cavitation. 5/8" Hard Chrome Plated Shaft. Rebuildable and Revalvable. Two-Stage Sealing System - Dirt Out, Oil In. Nitrogen Charged Internal Chamber. Designed For Use On Leveled & Mild Lifted Vehicles. Developed For Use With Larger Oversized Wheels and Tires. Made in USA.
Details
ReadyLIFT SST3000 Precision Performance Tuned Shocks SOLD INDIVIDUALLY - 93-2057R shocks for the 2009-2020 Ford F150 2WD/4WD trucks are designed to be used on trucks with 5 inches of rear lift. Engineered for driving enthusiasts who demand a specialized shock for their lifted or leveled truck.
CA Prop65 Warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

Safety & Warnings

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Installation
Estimated Installation Time: 1.5 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

ADDITIONAL SERVICES & COSTS MAY BE REQUIRED

INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.

INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.

ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.

Have a certified mechanic do it for you!