Rear Heavy Duty Track Bar Bracket - Jeep JK Wrangler 4WD 2007-2018
In stock
SKU
47-6438
$159.95
Includes Rear Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.
Jeep JK Wrangler Heavy Duty Rear Track Bar Bracket - USA Made! The 47-6438 Heavy-Duty Series REAR TRACK BAR BRACKET is an important component for lifted Jeeps. This kit includes one (1) bolt-on ReadyLIFT Heavy-Duty Series track bar bracket and hardware. This Rear Track Bar Bracket helps to correct important suspension geometry both on and off road. The bracket aids in keeping the rear track bar aligned properly with the axle housing while also providing a super strong axle mounting point for when severely articulating the Jeep suspension in an off road or rock crawling environment.
Includes Rear Plate Steel Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
INSTALLATION ALIGNMENT NOTE Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear. Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers. Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation. This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry. Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions. Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
Description
Includes Rear Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.
Details
Jeep JK Wrangler Heavy Duty Rear Track Bar Bracket - USA Made! The 47-6438 Heavy-Duty Series REAR TRACK BAR BRACKET is an important component for lifted Jeeps. This kit includes one (1) bolt-on ReadyLIFT Heavy-Duty Series track bar bracket and hardware. This Rear Track Bar Bracket helps to correct important suspension geometry both on and off road. The bracket aids in keeping the rear track bar aligned properly with the axle housing while also providing a super strong axle mounting point for when severely articulating the Jeep suspension in an off road or rock crawling environment.
Kit Components
Includes Rear Plate Steel Heavy Duty Track Bar Bracket. Fits JK 2dr & 4dr - For use with 3.0" to 5.0" Lifts Mounts directly to rear axle housing to correct track bar angle and properly center rear axle.
CA Prop65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
Safety & Warnings
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Installation
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
INSTALLATION ALIGNMENT NOTE Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear. Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers. Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation. This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry. Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions. Additional ADAS calibration costs may apply.