LOGIQ 2023+ Ford F-250 / F-350 / F-450 - Air Spring Kit
While most factory and aftermarket solutions compensate for heavy loads by solely increasing spring rate or adding more leaf packs, LOGIQ solves load leveling by using dual rolling sleeve air springs that are tuned to match the ride frequency of the front suspension, making for the smoothest ride possible in these trucks. Whether you tow heavy daily, or just take the toy hauler out occasionally, LOGIQ will increase your experience drastically.
WARNING - Never exceed manufacturer's Maximum Payload or GVWR
• Fits trucks with or without factory overload springs. • Does not fit cab & chassis models. • Not compatible with most aftermarket leaf springs. • Dual Rear Wheel (Dually) trucks require a DRW Hardware Kit - PN: 88-23XXX-DRW
Learn more about LOGIQ and Air Solutions!
Description
While most factory and aftermarket solutions compensate for heavy loads by solely increasing spring rate or adding more leaf packs, LOGIQ solves load leveling by using dual rolling sleeve air springs that are tuned to match the ride frequency of the front suspension, making for the smoothest ride possible in these trucks. Whether you tow heavy daily, or just take the toy hauler out occasionally, LOGIQ will increase your experience drastically.
WARNING - Never exceed manufacturer's Maximum Payload or GVWR
• Fits trucks with or without factory overload springs. • Does not fit cab & chassis models. • Not compatible with most aftermarket leaf springs. • Dual Rear Wheel (Dually) trucks require a DRW Hardware Kit - PN: 88-23XXX-DRW
Learn more about LOGIQ and Air Solutions!
While most factory and aftermarket solutions compensate for heavy loads by solely increasing spring rate or adding more leaf packs, LOGIQ solves load leveling by using dual rolling sleeve air springs that are tuned to match the ride frequency of the front suspension, making for the smoothest ride possible in these trucks. Whether you tow heavy daily, or just take the toy hauler out occasionally, LOGIQ will increase your experience drastically.
WARNING - Never exceed manufacturer's Maximum Payload or GVWR
• Fits trucks with or without factory overload springs. • Does not fit cab & chassis models. • Not compatible with most aftermarket leaf springs. • Dual Rear Wheel (Dually) trucks require a DRW Hardware Kit - PN: 88-23XXX-DRW
"Faster Installation - No drilling required... Simple "clamp around" bracket designs combined with 100% pre-assembly cuts installation time in half!
5th Wheel Hitch Integration - Confirmed 5th Wheel Hitch Compatibility: OEM 5th Wheel, BW - GNRK1123
Precision Fitment - Built-in features that locate off the factory frame and leaf spring locations guarantee proper fitment, geometry, and operation for every install.
Properly Scaled to Match the Size of Your Truck - Rather than using the archaic "one-size-fits-all" approach, LOGIQ properly scales the air spring size and quantity to truly maximize your specific truck's towing and hauling capability.
Improved Ride Quality, Stability, and Load Support - Competitor double-bellow style air springs have a natural frequency of ~2.5Hz (close to race car stiffness). LOGIQ Air Springs have a 1.6Hz natural frequency to ensure that you will feel the difference.
More Suspension Travel - Competitors limit the factory travel and typically eliminate the OE bump stops. LOGIQ Air Spring Kits have improved suspension travel and retain the factory bump stops for optimal suspension performance.
Lifetime Warranty - All LOGIQ suspension kits come with a Limited Lifetime Warranty and a FREE ReadyGUARD 5-year - 60,000 mile Powertrain Warranty."
Learn more about LOGIQ and Air Solutions!
This product may be covered by one or more trademarks, copyrights or patents. This information can be found at IP.WHEELPROS.COM
(1) Passenger Side Air Spring Assembly
(1) Driver Side Height Sensor Relocation Bracket (lower)
(1) Passenger Side Height Sensor Relocation Bracket (lower)
(1) Hardware Kit
(1) Overload Spring Removal Hardware Kit
(1) Manual Inflation Kit
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
• Fits trucks with or without factory overload springs.
• Does not fit cab & chassis models.
• Not compatible with most aftermarket leaf springs.
• Dual Rear Wheel (Dually) trucks require a DRW Hardware Kit - PN: 88-23XXX-DRW
Air Spring Location: Leaf Spring Mounted Outboard Frame Rails
Air Spring Quantity: 4
Load Capacity: 6,400 lbs @ 150 psi
Maximum Pressure: 150 psi
Minimum Pressure: 5 psi
TIRE/WHEEL SIZING GUIDE