ReadyLIFT offers 2005-2016 Ford F250/F350 Super Duty truck owners the necessary products to upgrade your current leveled or mild lifted suspension. Our 67-2550 Radius Arm Bracket Kit is derived from the products included in our new 3.5" series lift kit systems. An integral part of the 3.5" system are the new Radius Arm Drop Down Brackets that are designed to reposition the factory radius arms in the stock position in order to retain correct OEM suspension geometry. The 67-2550 Radius Arm Bracket Kit comes with our 67-2551 1.0" lower spring spacers which will easily allow owners with a 2.5" leveling kit or even our popular 2.5" Mild Lift kit to increase the lift height using the 1.0" lower spring spacers and radius arm drop brackets.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
INSTALLATION ALIGNMENT NOTE Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear. Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers. Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation. This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry. Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions. Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
Description
Radius Arm Drop Down Bracket Kit w/ lower coil spacers
Details
ReadyLIFT offers 2005-2016 Ford F250/F350 Super Duty truck owners the necessary products to upgrade your current leveled or mild lifted suspension. Our 67-2550 Radius Arm Bracket Kit is derived from the products included in our new 3.5" series lift kit systems. An integral part of the 3.5" system are the new Radius Arm Drop Down Brackets that are designed to reposition the factory radius arms in the stock position in order to retain correct OEM suspension geometry. The 67-2550 Radius Arm Bracket Kit comes with our 67-2551 1.0" lower spring spacers which will easily allow owners with a 2.5" leveling kit or even our popular 2.5" Mild Lift kit to increase the lift height using the 1.0" lower spring spacers and radius arm drop brackets.
CA Prop65 Warning
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
Safety & Warnings
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Installation
DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
INSTALLATION ALIGNMENT NOTE Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear. Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers. Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation. This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry. Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions. Additional ADAS calibration costs may apply.