ReadyLIFT now offers a quality spacer kit designed to lower the 2022-2026 Tundra and 2023-2026 Sequoia TRD Pro skid plate when the differential is dropped/lowered in conjunction with a lift kit. If you have a Tundra (non-TRD Pro) and want to install a TRD Pro skid plate, or if you have a lifted truck with a dropped differential, this is the kit you need to run the skid plate. Some 2022-2026 Tundra TRD trucks are coming with a TRD PRO skid plate. If you want to lift the truck with a ReadyLIFT lift kit, this is the supplemental skid plate spacer assembly you will need. Designed to work with our TRD Pro Plus lift kits only. Excludes cross-member kits.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.