2005+ FORD SUPER DUTY CASTER BUSHING KIT
One pair of precision machined caster correction bushings for 2005-2026 Ford Super Duty 4WD trucks.
Provides an increase of 1.5-2-degrees of positive caster to improve alignment geometry and steering performance.
Designed for only 8-Lug trucks
Description
One pair of precision machined caster correction bushings for 2005-2026 Ford Super Duty 4WD trucks.
Provides an increase of 1.5-2-degrees of positive caster to improve alignment geometry and steering performance.
Designed for only 8-Lug trucks
ReadyLIFT would like to announce to our valuable partners that we now offer a caster bushing kit for 2005-2026 Ford Super Duty trucks. Many modern lifted or leveled 4WD Super Duty trucks can benefit from the use of caster bushings when aligning the vehicle after lifting. ReadyLIFT Caster Bushing kit (67-2500CB) positively improves the alignment caster numbers 1.5-2-degrees, and overall steering geometry on some lifted Super Duty trucks while enhancing the overall handling performance.
Features & Benefits:
- Install in minutes.
- Increases alignment caster positively 1.5-2-degrees.
- For use on leveled or lifted applications where a positive increase in caster is desired.
- Precision machined for easy installation.
- Improves overall steering feel and can reduce unwanted tire wear.
- 8-Lug applications only
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
TIRE/WHEEL SIZING GUIDE